IOGEAR HVER PRO X GKB730-BN handleiding
Handleiding
Je bekijkt pagina 4 van 19
Anti-Ghosting / NKRO
As gaming has exploded in popularity, the term Anti-Ghosting has evolved from
its original meaning to now describe a non-mechanical keyboard’s ability to
accurately detect individual keystrokes when certain combinations of buttons
are pressed. Mechanical keyboards do not suffer this problem, and may instead
have a limit to the total number buttons that can be pressed simultaneously.
This limit is expressed as N-Key Rollover (NKRO) where N equals the number
of keys that can be pressed simultaneously. HVER PRO has no limit and
features full NKRO, meaning every keystroke will be detected no matter how
many keys are simultaneously pressed. Now you can play with confidence
knowing your keyboard won’t hold you back!
Backlight Color Adjustments
Press Fn + Home or Fn + End to cycle up or down through the 9 color options
available within each backlighting mode: Rainbow, White, Purple, Blue, Cyan,
Green, Yellow, Orange and Red. Note: Sparkle and Monochrome backlight
modes do not have color options available.
Backlight Pattern Adjustments
Press Fn + PgUp to increase brightness
Press Fn + PgDn to decrease brightness
Press Fn + ◄ to shift light flow direction left
Press Fn + ► to shift light flow direction right
Press Fn + + to increase light speed
Press Fn + - to decrease light speed
DIY Custom Lighting
The HVER PRO X has three DIY lighting modes that can be programmed
without using the HVER PRO X user software.
To set the DIY lighting mode:
1. Press Fn + F9, Fn + F10 or Fn + F11 to select a DIY backlighting mode.
2. Press Fn + Pause to start DIY programming. The 4 status LEDs will begin
flashing.
3. Press the keys you want to light. Each press will cycle the key color as
follows: Off, Red, Green, Blue, Yellow, Purple, Cyan, White.
4. Press Fn + Pause to exit and save the setting. The 4 status LEDS will stop
flashing.
Note: Change the FN key color last. When changing the Fn key color, cycle to
the color you want but do not release the key. Continue holding down the key
and press Pause to save, then you can release the key.
Keyboard - Front View
1. Num Lock LED – turns on when Num Lock key is pressed
2. Caps Lock LED – turns on when Caps Lock key is pressed
3. Scroll Lock LED – turns on when Scroll Lock key is pressed
4. Windows Lock LED - turns on when Fn + is pressed to indicate the
Windows key is disabled
3
LED Backlight Functions
The HVER PRO X has 8 built-in backlight modes with 47 different color/pattern
combinations, plus 3 DYI per-key user programmable lighting modes. The
backlighting can be further customized issuing the downloadable HVER PRO X
user software. Press Fn + PrtSc to cycle through the 8 different color modes:
Sparkle, Monochrome, Fixed Single-Color, Breathing, Follow, Rainbow Ripple,
Explode and Wave.
Bekijk gratis de handleiding van IOGEAR HVER PRO X GKB730-BN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | HVER PRO X GKB730-BN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1498 MB |
