IOGEAR GWKIT4K handleiding
Handleiding
Je bekijkt pagina 3 van 10
Hardware Installation
1. Connect the antenna into the transmitter of the GWKIT4K.
3
2. Connect the HDMI cable from the transmitter to the HDMI output connection of your source.
3. Connect the USB-A to Micro USB cable from the transmitter to the USB-A port of your source.
4. Connect the HDMI cable from the receiver of the GWKIT4K to the HDMI input connection of
your display.
5. Power on the GWKIT4K receiver and your display. On the receiver, the power LED will turn
on, then the HDMI LED and lastly the Wi-Fi LED. You will see a IOGEARCast splash screen
(see below).
6. Power on the GWKIT4K transmitter and the status LED will turn solid red. It will start to blink
while searching for the receiver. Once the receiver is found, the status LED will turn solid
green. The splash screen will change to mirror your source content.
1
4
3
2
5V/1A
HDMI
Source
Bekijk gratis de handleiding van IOGEAR GWKIT4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GWKIT4K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1162 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Nee |
| Connectiviteitstechnologie | Bedraad |
| Ethernet LAN | Nee |
| Geïntegreerde geheugenkaartlezer | Nee |
