IOGEAR GCS1942NC handleiding
Handleiding
Je bekijkt pagina 9 van 18
9
3. Hotkey Settings
The Hotkey Settings command allows you to enable/disable and change the hotkey used to
invoke the HSM (Hotkey Settings Mode). Use the Formula -to set Parameters - to create a
Command.
Formulas:
Command + Input Command+ [Enter]
Parameters:
Command Description
hotkey Hotkey Settings Command
Input Command Description
num Change the HSM invoke key to:
[Num Lock] + [-] (Default setting)
f12 Change the HSM invoke key to:
[Ctrl] + [F12]
Enter Description
Enter Enter and send out command
Hotkey Settings Commands
Some available formulas for Hotkey Settings commands are as follows:
Command + Input Command + [Enter]
To change the HSM invoke key to [Num Lock] + [-], type the following:
hotkey num [Enter]
To change the HSM invoke key to [Ctrl] + [F12], type the following:
hotkey f12 [Enter]
Note:
1.Each command string can be separated with a space.
2.The default hotkey is num.
3.The ASCII code for Enter is 0x0D0A.
Bekijk gratis de handleiding van IOGEAR GCS1942NC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCS1942NC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 976 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1590 g |
| Breedte | 335 mm |
| Diepte | 155.6 mm |
| Hoogte | 53.9 mm |
