IOGEAR GCS1932M handleiding
Handleiding
Je bekijkt pagina 30 van 36
30
6. If you enabled Check Firmware
Version, the Utility compares the
device’s rmware level with that of the
upgrade les. If the device’s version
is higher than the upgrade version,
a dialog box below will give you the
option to Continue or Cancel.
7. If you did not enable Check Firmware
Version, the Utility installs the upgrade
les without checking whether they are
of higher level, or not.
8. As the Firmware Upgrade proceeds,
a vstatus message will appear in
the Status Messages panel, and the
progress toward completion is shown
on the Progress bar.
9. After the upgrade has completed, a
screen appears to inform you that the
procedure was successful. Click Finish
to close the Firmware Upgrade Utility.
10. After a successful completion, the
GCS1932M/1934 will exit the Firmware
Upgrade Mode and resets itself.
Firmware Upgrade Fail
If the Upgrade Succeeded screen does not appear, this means that the upgrade failed to
complete successfully. If this occurs, repeat the upgrade procedure from the beginning (see
Before Starting Firmware Upgrade).
Bekijk gratis de handleiding van IOGEAR GCS1932M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCS1932M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2699 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Grey |
| Ingebouwd display | Nee |
| Gewicht | 660 g |
| Breedte | 200 mm |
| Diepte | 42.9 mm |
