IOGEAR GCS1932M handleiding
Handleiding
Je bekijkt pagina 28 van 36
28
Firmware Upgrade Utility
Firmware Upgrade Conguration
GCS1932M/1934M Windows based Firmware Upgrade Utility (FWUpgrade.exe) provides a
smooth-automated process for rmware upgrade.
The Utility comes as part of a Firmware Upgrade Package that is specic for each device.
New rmware upgrade packages are posted on our IOGEAR.COM website, as new rmware
revisions become available. Please check the website regularly to nd latest packages and
information relating to rmware revisions and upgrades.
Before Starting Firmware Upgrade
In order to perform a rmware upgrade, use a computer that is not connected to the
GCS1932M/1934M. To set GCS1932M/1934M to Firmware Upgrade Mode:
1. From a computer that is not part of the KVM installation, go to www.iogear.com/product/
GCS1932M or www.iogear.com/product/GCS1934M to get a list of available Firmware
Upgrade Packages
2. Choose the Firmware Upgrade Package (usually the most recent one), and download it
to a computer that is not part of the KVM installation.
3. Disconnect the GCS1932M/1934M from the KVM installation and power the switch OFF.
4. Connect one of the USB DisplayPort KVM cable set’s Type A USB connectors to a USB
Type A port on the computer that is not part of your KVM installation.
5. At the other end of the cable set, connect the USB Type B connector to the Type B USB
port in Port 1 KVM section on the GCS1932M/1934M.
Note: The USB DisplayPort KVM cable set’s USB Type B connector can be connected
to any USB Type KVM Port Section, but the Port Selection pushbutton in Step 6 below
must be Port 1
6. Press and hold Port 1 selection pushbutton.
7. While holding Port 1 selection pushbutton, connect the power adapter to the
GCS1932M/1934M to enter Firmware Upgrade Mode.
8. The front panel LEDs will ash together, indicating Firmware Upgrade Mode is in effect.
Starting Firmware Upgrade
1. Run the downloaded Firmware Upgrade
Package le – either by double clicking
the le icon, or using a command line to
enter the full path.
Bekijk gratis de handleiding van IOGEAR GCS1932M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCS1932M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2699 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Grey |
| Ingebouwd display | Nee |
| Gewicht | 660 g |
| Breedte | 200 mm |
| Diepte | 42.9 mm |
