IOGEAR GCS1932M handleiding
Handleiding
Je bekijkt pagina 22 van 36
22
Port Switching Keys
To disable the Port Switching Keys ([Scroll Lock][Scroll Lock]) or ([Ctrl][Ctrl]):
1. Invoke HSM
2. Press [X] [Enter]
Note: This procedure is a toggle. To enable the Port Switching keys, repeat Step 1 and 2
Firmware Upgrade Mode
To set the GCS1932M/1934M to Firmware Upgrade Mode:
1. Invoke HSM
2.Key in [u][p][g][r][a][d][e]
3.Press [Enter]
The front panel LEDs will ash to indicate the Upgrade has started
Note: To exit Firmware Upgrade Mode, you must power OFF the GCS1932M/1934M
Restore Default Settings
To reset the GCS1932M/1934M to its default hotkey settings:
1. Invoke HSM
2. Press [R][Enter]
Alternative Manual Port Selection
To toggle between the default and the alternative front panel pushbutton manual port selection
settings:
1. Invoke HSM
2. Press [S]
This procedure is a toggle. Repeat to revert to the original setting. See Alternative
Manual Port Selection for more information
Power on Detection
With Power on Detection, if the focus computer is powered OFF, the GCS1932M/1934M will
automatically switch to the next powered ON computer. Power on Detection can be enabled or
disabled. The default setting is enabled. To disable Power on Detection:
1. Invoke HSM
2. Press and release [E]
This procedure is a toggle. Repeat to revert to the original setting
Bekijk gratis de handleiding van IOGEAR GCS1932M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCS1932M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2699 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Grey |
| Ingebouwd display | Nee |
| Gewicht | 660 g |
| Breedte | 200 mm |
| Diepte | 42.9 mm |
