IOGEAR GCS1908W handleiding
Handleiding
Je bekijkt pagina 11 van 58
11
No. Component Description
1 Upper Handle with
Release Bar
Pull to slide the LCD module out
Push to slide the LCD module back in
2 LCD Module After sliding the LCD module out, push the release bar on top of
the handle to ip up the cover, accessing the LCD display
3 Port Selection
Pushbutton / LEDs
8 for GCL1908W
16 for GCL1916W
Press the port pushbuttons to bring the KVM focus to the
computer connected to the corresponding port
An Orange ON LINE LED lights up to indicate that the computer
connected to its corresponding port is up and running
A Green SELECTED LED lights up to indicate that the computer
connected to the corresponding port is selected for KVM control
4 Keyboard Standard 99-key keyboard
5 Touchpad Standard mouse touchpad
6 External Mouse
Port
The USB port is available to connect a USB keyboard or mouse
device for users who prefer to use external keyboard or mouse
7
Power LED
Lights green to indicate that the unit is receiving power
8 Lock LEDs The Num Lock, Caps Lock, Scroll Lock LEDs are located here
9 Reset Switch Located to the right of the Lock LEDs.
Press this recessed switch in with a small object to perform a
system reset
10 Firmware Upgrade
Port
The rmware upgrade cable will be connected to this 3.5mm audio
jack to perform Firmware Upgrade
11 Firmware Upgrade
Switch
During normal operation and while performing a rmware upgrade,
this switch should be in NORMAL position.
If a rmware upgrade operation does not complete successfully,
this switch will be used to perform a rmware upgrade recovery.
See Firmware Upgrade Recovery for details
12 LCD On/O Button Push this button to turn the LCD monitor on and o. The button
lights up when the LCD monitor is o
Note: This button lights up to indicate that the monitor is o, not the
KVM switch
13 LCD Controls The buttons to control the position and picture settings of the
LCD display are located here
Bekijk gratis de handleiding van IOGEAR GCS1908W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCS1908W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4789 MB |
