IOGEAR GCS1422TAA4 handleiding
Handleiding
Je bekijkt pagina 19 van 36
19
Cable Connection
To install IOGEAR Secure KVM Switch, please refer to the installation diagram on the following page. The
numbers in the diagrams correspond to the steps below:
1. Connect the wired USB keyboard and USB mouse into the USB console ports located on the unit’s
rear panel. The USB keyboard and mouse console ports are compatible only with standard wired
USB keyboard/mice.
2. Connect the console monitor(s) into the console Video port(s) located on the unit’s rear panel.
Then, power the monitor on.
3. Connect the speakers into the console’s speaker jack located on the unit’s front panel.
Hardware Setup
Note:
1. The console USB keyboard and mouse ports are interchangeable. You can con-
nect a keyboard to the mouse port and vice versa. However, for optimal operation,
it is recommended that you connect the USB keyboard to the console’s USB
keyboard port and the USB mouse to the console’s USB mouse port.
2. For security purposes, IOGEAR Secure KVM Switch does not support wireless
keyboards and mice. Do not attempt to connect a wireless keyboard/mouse to the
switch.
3. During IOGEAR Secure KVM Switch operation, non-standard keyboards with inte-
grated USB hubs and/or other USB-integrated devices may not be fully supported,
due to the strict security standards and policy for IOGEAR Secure KVM Switch. If
supported, only basic (HID) keyboard operations will function.
4. When the IOGEAR Secure KVM Switch is powered on and the keyboard or
mouse is rejected, the keyboard and mouse will be inoperable (i.e., mouse cursor
freezes and/or no key strokes response on the connected computer)
Note:
1. When the IOGEAR Secure KVM Switch is powered on, the Video LED lights green
indicating that the video connection is established. The Video LED ashes when
non-qualied monitors are connected
2. Due to security policy, IOGEAR Secure KVM Switch does not support monitor hot-
swap. If you would like to change the console monitor, you must rst power o the
entire installation.
3. Connected monitors will be ltered when IOGEAR Secure KVM Switch is powered
on. Non-qualied monitor will be rejected (Video LED ashes). Please refer to the
LED Display for detail visual identication.
Note:
1. Only speaker connections are allowed. The use of analog microphones or line-in
audio connections is strictly prohibited.
Bekijk gratis de handleiding van IOGEAR GCS1422TAA4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCS1422TAA4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3299 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Nee |
| Gewicht | 2100 g |
| Breedte | 336.5 mm |
| Diepte | 168.2 mm |
