IOGEAR GCS1412TAA4 handleiding
Handleiding
Je bekijkt pagina 24 van 36
24
Operation
Port ID Numbering
Each KVM port on IOGEAR Secure KVM Switch is assigned a port number (1-2 for 2-Port models; 1-4 for
4-Port models; 1-8 for 8-Port models). The port numbers are marked on the rear side of the switch. See
Rear View section in this manual. The port ID of a computer is derived from the KVM port number to which
it is connected.
LED Display
In addition to the Power LED, IOGEAR Secure KVM Switch and RPS have Port LEDs (Online and
Selected), keyboard lock (Num Lock / Caps Lock / Scroll Lock) LEDs and CAC LEDs that are built into the
front panel to indicate Port / Keyboard / CAC reader operating status. A Video LED is located on rear panel
(of the switch) to indicate the operating status of the video connection. These LEDs also serve as the alarm
notication for KVM security issues.
LED Indication
Power LED (on the Secure
KVM switch)
Power LED is located on the front panel
7 Power LED lights green to indicat that the KVM switch is powered on.
Video LED (on the Secure
KVM switch)
Video LED is located on the rear panel next to each video connector.
7 Video LED lights green when the video connection is established.
7 Video LED ashes when a non-qualied monitor is connected.
Port LED (on the Secure
KVM switch and the RPS)
Port LEDs located on the front panel of the switch and the upper-left side of
each pushbutton of the RPS are to indicate the Port selection or connection
status.
7 Online - Port LED lights dim orange to indicate that the computer attached to
its corresponding port is connected and powered on.
7 Selected - Port LED lights bright orange to indicate that the computer
attached to its corresponding port has the KVM focus.
Warning - Flashes to indicate that a non-qualied USB HID device is connected to console USB
keyboard port or mouse port when the corresponding port has the focus.
Note:
1. Port and CAC LEDs will ash constantly when a chassis intrusion is
detected. See Chassis Intrusion Detection section for details.
2. Port and CAC LEDs (on the Secure KVM switch) also indicate the Secure
KVM self-test status. See Operation section for further details
CAC LED (on the Secure
KVM switch and the RPS)
Models with CAC function
only
CAC LEDs located on front panel of the switch and the upper-right side of the
RPS are to indicate CAC reader selection or connection status:
Online – CAC LED lights dim green to indicate that the computer attached to
the corresponding port has a USB CAC reader cable connection established
and that CAC function is enabled.
Selected – CAC LED lights bright green to indicate that the CAC function is
enabled and the computer attached to the corresponding port has the CAC
focus.
None – No light indicates that the cable is not connected or CAC has been
disabled.
Warning – CAC LED ashes to indicate that a non-qualied USB Smart card /
CAC reader is connected when the corresponding port has the focus.
Note:
1. CAC function of each port can be enabled or disabled by pressing the port
selection button on the switch for more than 3 seconds (This is a toggle
function). Please refer to Operation section for details.
2. Port and CAC LEDs will ash constantly when a chassis intrusion is
detected. See Chassis Intrusion Detection section for further details.
Bekijk gratis de handleiding van IOGEAR GCS1412TAA4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCS1412TAA4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3299 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Nee |
| Gewicht | 1720 g |
| Breedte | 336.5 mm |
| Diepte | 158.7 mm |
