IOGEAR GCL1900W handleiding
Handleiding
Je bekijkt pagina 5 van 34
5
■ Before working on the rack, please make sure that the stabilizers are secure to the
rack, extended to the oor, and that the full weight of the rack rests on the oor.
Install the front and side stabilizers on a single rack or front stabilizers for joined
multiple racks before working on the rack.
■ Always load the rack from the bottom up and load the heaviest item in the rack rst
■ Please make sure that the rack is level and stable before extending a device from
the rack
■ Use caution when pressing the device rail release latches and sliding a device into or
out of a rack; the slide rails can pinch your ngers
■ Do not overload the AC supply branch circuit that provides power to the rack. The
total rack load should not exceed 80 percent of the branch circuit rating
■ Make sure that all equipment used on the rack – including power strips and other
electrical connectors – is properly grounded
■ Ensure that proper airow is provided to devices in the rack
■ Ensure that the operating ambient temperature of the
rack environment does not exceed the maximum ambient
temperature specied for the equipment by the manufacturer
■ Do not step on or stand on any device when servicing other
devices in a rack
■ Caution: Slide/rail (LCD KVM) mounted equipment is not to be
used as a shelf or a work space
■ If the following conditions occur, unplug the device from the wall outlet and and replace
with new power cord
o The power cord or plug has become damaged or frayed
o Liquid has been spilled into the device
o The device has been exposed to rain or water
o The device has been dropped, or the cabinet has been damaged
o The device exhibits a distinct change in performance, indicating a need for service
o The device does not operate normally when the operating instructions are followed
■ Only adjust those controls that are covered in the operating instructions. Improper
adjustment of other controls may result in damage that will require extensive work by a
qualied technician to repair
■ Do not connect the Audio Jack connector marked “UPGRADE” to a public
telecommunication network
■ Avoid circuit overloads. Before connecting equipment to a circuit, know the power
supply’s limit and never exceed it. Always review the electrical specications of a circuit
to ensure that you are not creating a dangerous condition or that one does not already
exist. Circuit overloads can cause a re and destroy equipment.
Rack Mounting
Bekijk gratis de handleiding van IOGEAR GCL1900W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCL1900W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2617 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| AC-adapterfrequentie | 50/60 Hz |
| AC-adapter ingangsspanning | 100-240 V |
| Stroom | 1 A |
| Aan/uitschakelaar | Ja |
