IOGEAR GCL1900W handleiding
Handleiding
Je bekijkt pagina 29 van 34
29
Firmware Upgrade Succeeded
After the upgrade has completed, a screen appears to inform you that the procedure was
successful
Click Finish to close the Firmware Upgrade Utility
If the firmware upgrade fails, the Upgrade Succeeded screen will not appear.
Possible reasons for firmware upgrade failure are:
• When a rmware upgrade was manually aborted
• When the unit’s rmware becomes corrupted for some reason and unable
to be operated
• When a rmware upgrade procedure is interrupted
To recover a failed firmware upgrade, do the following:
1. Power OFF the GCL1900W
2. Connect the Firmware Upgrade Cable to the Firmware Upgrade Port
3. Slide the Firmware Upgrade Switch to the Recover position
4. Power ON the GCL1900W and repeat the Firmware Upgrade Procedure
5. After the GCL1900W has been successfully upgraded, power the KVM console OFF,
and slide the Firmware Upgrade Switch back to the Normal position.
6. Then, power the GCL1900W back on again
Bekijk gratis de handleiding van IOGEAR GCL1900W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCL1900W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2617 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| AC-adapterfrequentie | 50/60 Hz |
| AC-adapter ingangsspanning | 100-240 V |
| Stroom | 1 A |
| Aan/uitschakelaar | Ja |
