IOGEAR GCL1900W handleiding
Handleiding
Je bekijkt pagina 16 van 34
Connecting the GCL1900W
Refer to the installation diagram example below while following below instruction
1. Connect the VGA and audio connectors of the included KVM cable into the KVM
ports located in the CPU section on the rear of the GCL1900W
Note: The GCL1900W supports speakers only. It does not support microphones.
Connect the KVM cable’s speaker jack (green) to the GCL1900W’s audio port
2. Connect the USB, VGA and audio connectors of the KVM cable into their respective
ports of a computer
3. If an external console is needed, connect the keyboard, mouse, VGA monitor and
speakers (microphone not supported) into their respective ports on the Console
Section of the GCL1900W
4. Connect the GCL1900W to an AC power source using the included power cord
5. Turn on the GCL1900W power
6. Turn on your PC power
Installation Diagram
16
Power Socket
Power Switch
Grounding
Terminal
USB VGA
2
6
1
4
5
3
Bekijk gratis de handleiding van IOGEAR GCL1900W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCL1900W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2617 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| AC-adapterfrequentie | 50/60 Hz |
| AC-adapter ingangsspanning | 100-240 V |
| Stroom | 1 A |
| Aan/uitschakelaar | Ja |
