IOGEAR GCL1900W handleiding
Handleiding
Je bekijkt pagina 11 van 34
11
No. Component Description
1 Upper Handle with
Release Bar
Pull to slide the LCD module out
Push to slide the LCD module back in
2 LCD Module After sliding the LCD module out, push the release bar on top of
the handle to ip up the cover, accessing the LCD display
3 LCD Controls The buttons to control the position and picture settings of the
LCD display are located here
4 LCD On/O Button Push this button to turn the LCD monitor on and o. The button
lights up when the LCD monitor is o
Note: This button lights up to indicate that the monitor is o, not
the KVM switch
5 Firmware Upgrade
Switch
During normal operation and while performing a rmware upgrade,
this switch should be in NORMAL position.
If a rmware upgrade operation does not complete successfully,
this switch will be used to perform a rmware upgrade recovery.
See Firmware Upgrade Recovery for details
6 Firmware Upgrade
Port
The rmware upgrade cable will be connected to this 3.5mm
audio jack to perform Firmware Upgrade
7
Reset Switch
Located to the right of the Lock LEDs. Press this recessed
switch in with a thin object to perform a system reset
8 Lock LEDs The Num Lock, Caps Lock, Scroll Lock LEDs are located here
9 Rack Mounting
Tabs
Rack mounting tabs are located at each corner of the unit.
The LCD KVM switch is designed for rack mounting. If the
KVM switch is not rack mounted, make sure to place it on a
completely at and rm surface before pulling the device in or
out to prevent damage due to uneven force on the module
10 Power LED Lights green to indicate that the LCD KVM Console is powered ON
11 USB Port The USB port is available for peripheral sharing with USB devices
(ash drive, CD-ROM drive, etc)
Or a USB mouse for users who prefer to use an external mouse
12 Touchpad Standard mouse touchpad
13 Keyboard Module Standard 99-key keyboard
Bekijk gratis de handleiding van IOGEAR GCL1900W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCL1900W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2617 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| AC-adapterfrequentie | 50/60 Hz |
| AC-adapter ingangsspanning | 100-240 V |
| Stroom | 1 A |
| Aan/uitschakelaar | Ja |
