IOGEAR GCL1800 handleiding
Handleiding
Je bekijkt pagina 37 van 44
37
Rack Mounting
• Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the
oor, and that the full weight of the rack rests on the oor. Install front and side stabilizers on a single
rack or front stabilizers for joined multiple racks before working on the rack.
• Always load the rack from the bottom up and load the heaviest item in the rack rst.
• Make sure that the rack is level and stable before extending a device from the rack.
• Use caution when pressing the device rail release latches and sliding a device into or out of a rack as
the slide rails can pinch your ngers.
• After a device is inserted into the rack, carefully extend the rail into a locked position and then slide the
device into the rack.
• Do not overload the AC supply branch circuit that provides power to the rack. The total rack load
should not exceed 80 percent of the branch circuit rating.
• Make sure that all equipment used on the rack, including power strips and other electrical connectors,
are properly grounded.
• Ensure that proper airow is provided to all devices in the rack.
• Ensure that the operating ambient temperature of the rack environment does not exceed the
maximum specied by the equipment manufacturer.
• Do not step on or stand on any device when servicing other devices in a rack.
Bekijk gratis de handleiding van IOGEAR GCL1800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GCL1800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2680 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 13607 g |
| Breedte | 482 mm |
| Diepte | 533 mm |
| Hoogte | 44 mm |
