Inventum VDW8030W handleiding
Handleiding
Je bekijkt pagina 40 van 84
English• 40
Cleaning the condenser unit
Please clean the condenser unit approximately once every 3 months
ifitisfrequently used.
Do not damage the condenser unit!
1. Leave the dryer to cool down.
2. Residual water may leak out, place an absorbent cloth under
the maintenance cover.
3. Unlock the maintenance cover.
4. Completely open the maintenance cover.
5. Remove lint and fluff from the condenser unit using a vacuum cleaner with
adusting brush attached. Do not apply any pressure. Otherwise, the condenser
unit could be damaged. Thedryerwill not dry if the cooling fins are damaged
orbent.
6. Clean the seals.
7. Close the maintenance cover until it locks into position.
WARNING! Do not use hard/sharp-edged objects!
Do not operate the dryer without thecondenser unit!
Troubleshooting
Many malfunctions and faults that might occur in daily operation can be easily remedied.
Time and money will be saved because a service call will not be needed.
The following guide may help you find the reason for a malfunction and correct it.
Display Reason Solutions
Condensate tank is full Empty the condensate tank.
Water pump failure or water level sensor
failure
Please contact the customer service if the problem
persists.
E33
Temperature sensor error
E64
BLDC motor communication error
E82
PCB communication error
• Only authorized technicians can carry out repairs.
• If the display shows a different error code and the dryer does not work, please call the customer service.
• Before you call the customer service, please check if you can resolve the problems yourself by
consulting the user instructions.
Bekijk gratis de handleiding van Inventum VDW8030W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Inventum |
| Model | VDW8030W |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8590 MB |
