Handleiding
Je bekijkt pagina 21 van 52
English • 21
before the first use
3
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic, polystyrene and cardboard) out of reach of children. Check the appliance
after unpacking for any damage, possible from transportation.
Place the appliance on a flat and stable surface. Make sure there is enough open space around the appliance for the intake
and/or outlet vents. A minimum clearance of 10 cm is required between the appliance and any adjacent walls. The appliance
needs good ventilation for easy dissipation of heat, high efficiency of refrigeration and low power consumption. Note: check
the climat class of the appliance. When installing the appliance in a environment that is not suitable, the appliance can not
function properly.
Leave the appliance to stand for at least 3 hours before you insert the plug into the socket.
First clean the interior of the appliance. Use warm water and a neutral detergent. After cleaning, rinse the interior with clean
water and rub dry. Leave the appliance to dry for 1 to 2 hours.
usage
4
LED 3 ALED 2LED 1
3 sec
Super Cool
Position 1 2 3 4 OFF
LED 1 2 3 2 + 3 All LED’s off
Temperature 6-8°C 3-5°C 2-4°C 1-3°C n/a
BUTTON A Temperature setting of refrigerator compartment
The appliance features internal controls. Check that the voltage in your home corresponds with the voltage printed on the
back of the appliance and plug it in a socket.
Set the temperature with the thermostat (2) and choose a setting between 1 and 4. We advise to set the appliance on setting 2.
The appliance now cools continuously until the set temperature has been reached. Do not place anything in the appliance
until the set temperature is reached. This usually takes 2 or 3 hours. Then set the thermostat at the desired setting and place
food into the refrigerator.
Set the appliance on a higher setting when the ambient air temperature rises to maintain the temperature inside the appliance.
Display
• Once initially powered on,all LED lights turn on for 3 seconds, and then the refrigerator runs at the default setting
(LED 2 light is on).
• In case of a failure, the corresponding LED blinks.
• In case of no failures, it shows the actual temperature setting of refrigerator.
Temperature setting
• Each time the temperature setting button A is pressed once,the temperature setting changes one time. After the
temperature setting has been completed, the refrigerator will run according to the set value after 30s.
（ ）
（ ）
（ OFF ）（ + ）（ ）
Bekijk gratis de handleiding van Inventum KV1430B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Inventum |
| Model | KV1430B |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4788 MB |
