Intex Krystal Clear QS500 handleiding
Handleiding
Je bekijkt pagina 18 van 33
329
A
SAVE THESE INSTRUCTIONS
English
(329IO) MODEL ECO5220/5230 & 6220/6230 SALTWATER SYSTEM WITH E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/23/2024
Page 17
1. Turn on the filter pump.
2
.
Start up the unit:
Plug the power cord into the electrical outlet and test the RCD (circuit
breaker). Press
button. Flashing code “00” appears on the electronic
control station’s LED, indicating that the unit is ready to be programmed.
3. Set operating hours for Saltwater system:
With code “00” flashing, press
button to set the
desired operating hours. See the “Operating Time
Table” for the required operating hours related to
each pool size. Pressing
will increase the time
from 01 to 12 hours maximum. If you have selected
too many hours keep pressing to repeat the cycle.
The built-in timer will now activate your Saltwater
System, at the same time each day, for the number
of hours you have set.
NOTE:
The Saltwater System will not operate if the filter pump is not operating. Make sure
to program your filter pump (or start it manually) for operation beginning 5 minutes before the
saltwater system and finishing 15 minutes after the saltwater system.
4
.
Lock keypad controls:
With the desired hour value showing, press
button until you hear a
“beep”. A green “WORKING” indicator on the control panel will light up
within a few seconds to indicate that the saltwater system has started
sodium hypochlorite production. Locking the control buttons into this
setting prevents unauthorized changing of the operating cycle.
NOTE:
If you forget to lock the keypad controls, the system will
automatically lock it and start working 1 minute later.
5.
Readjust operating time if necessary:
The operating hours can be re-adjusted if necessary. Press
button
until you hear a “beep” to unlock the keypad and the current
programmed time will flash. Repeat steps 3 to 4.
OPERATION INSTRUCTIONS
(1 to 12 hours max per cycle)
Bekijk gratis de handleiding van Intex Krystal Clear QS500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intex |
| Model | Krystal Clear QS500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7235 MB |
