Intex Krystal Clear 126688 handleiding
Handleiding
Je bekijkt pagina 17 van 26
(379IO) MODEL LS5220/5230 SALTWATER SYSTEM ENGLISH SIZE: 7.5” X 10.3” PANTONE 295U 09/30/2024
SAVE THESE INSTRUCTIONS
Page 16
379
A
English
MAINTENANCE
IMPORTANT
Unplug the power cord before cleaning your system. Also close the plunger valves on your
pool or insert the black hat-like plugs in the strainer opening to prevent water spillage. After
completing all maintenance tasks, you must plug the power cord back in and open the plunger
valves or remove the plugs.
Flow Sensor Cleaning
1
. Unscrew the collar of the flow sensor
(9)
and remove it from the chlorine electrode housing.
2
. Use a plastic brush and water to clean the flow sensor surface and the hinge.
3
. Reinstall the flow sensor by aligning the locator notch on the flow sensor to the connection ridge in the
conduit. Insert and tighten the sensor back into its position. Do not overtighten.
Chlorine Electrode and 2-in-1 Sensor Cleaning
In most cases the “Chlorine Electrode Self-Clean” function will keep the chlorine electrode in optimum
condition. If the pool water is very hard (very high mineral content), we recommend opening and visually
inspect the chlorine electrode
(3)
and 2-in-1 sensor
(13)
monthly. Follow below steps to clean them.
Inspection and cleaning:
1
. Turn off the system and unplug the power cord.
2
.
For filter pumps with 1-1/4” (32mm) hose size
-
To prevent water from flowing out of the pool,
unscrew the strainer grids from the strainer connectors and insert the hat-like plugs into the strainer
connectors.
For filter pumps with 1-1/2” (38mm) hose size -
Close the plunger valves or split plunger valve.
3
. Disconnect the 2 hoses from the Saltwater System, and attach the cell covers
(15)
to the inlet and outlet
of the chlorine electrode housing
(5)
.
4
.
Unscrew the collar of the flow sensor and pull out the flow sensor from the chlorine electrode housing
(5)
.
Connection Ridge
Locator Notch
Hinge
Bekijk gratis de handleiding van Intex Krystal Clear 126688, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intex |
| Model | Krystal Clear 126688 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5319 MB |
