Intermatic PF1103 handleiding
Handleiding
Je bekijkt pagina 3 van 4
3
TROUBLESHOOTING
SYMPTOM CAUSE(S) CORRECTIVE ACTION
1. Filter Pump will not start 1a. Defective thermostat Replace thermostat
when temp. is below 32˚F. 1b. Defective relay Replace relay
1c. Faulty wiring Check wiring
1d. Power outage Install stand-by power
2. Time Switch will not keep time 2a. Frequent power outages Reset dial
-dial is turning. 2b. Wrong voltage/cycle Change clock motor
2c. Loose clock motor connections Check connections
3. Time Switch Dial stops at ON 3a. Loose tripper Check/change tripper
or OFF tripper. 3b. Bent dial Check/change mechanism
3c. Defective motor Change clock motor
4. Load is ON at all times - dial is 4a. Welded contacts Change mechanism
turning. 4b. Two ON-trippers on dial Change tripper
4c. Defective mechanism Change mechanism
120 VOLT WIRING
Interconnecting wiring diagram between Model PF1103 or PF1103M Freeze
Protection Control and a 120 volt Time Switch and 120 volt Filter Pump
1.
2.
PF1103 FREEZE PROTECTION CONTROL
120 VOLT TIME SWITCH OR AIR SWITCH
158PF11834.indd 3 3/24/09 9:00:33 AM
Bekijk gratis de handleiding van Intermatic PF1103, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intermatic |
| Model | PF1103 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1129 MB |
