Intergas Rapid 32 Plus handleiding
Handleiding
Je bekijkt pagina 24 van 68
Intergas Heating Ltd 24
7. CONNECTIONS
7.1 Connect the CH system
1. Flush the CH system thoroughly.
2. Fit the flow (B) and return (A) pipes together with the shut-off valves to
the boiler.
All pipes must be mounted tension-free in order to avoid ticking of the
pipes. Existing connections inside the boiler must not be twisted in
order to avoid leakages.
The CH system should be provided with:-
• A filling/draining tap in the return pipe immediately below the
appliance.
• A drain tap at the lowest point(s) of the installation.
NOTE
The boiler is equipped with an internal pressure relieve
valve
• A check valve, if pipes run upwards at a short distance from the
appliance. This avoids the occurrence of thermosiphon effect during
DHW operation mode.
Bekijk gratis de handleiding van Intergas Rapid 32 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intergas |
| Model | Rapid 32 Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10092 MB |
