Intergas Rapid 25 Plus handleiding
Handleiding
Je bekijkt pagina 34 van 68
Intergas Heating Ltd 34
7.6.4 Length flue pipe and air inlet when connecting to a concentric flue
system
Concentric Ø60/100
C13
C33
Intergas Rapid 25
10 m
11 m
Intergas Rapid 32
10 m
10 m
Replacement lengths
Curve 90°
R/D=1
2 m
Curve 45°
R/D=1
1 m
Knee 90°
R/D=0,5
4 m
Knee 45°
R/D=0,5
2 m
7.6.5 Horizontal flue system
The 60/100 mm horizontal flue system may be extended up to a maximum length as
mentioned in the table above.
The wall terminal must be installed horizontally.
CAUTION
Only an Intergas approved flue is to be used with this product.
Failure to comply with this requirement will invalidate your
guarantee and may lead to a dangerous situation!
The horizontal wall terminal must be installed level as the flue terminal already has a
3 degree rise built in. If the use of flue extensions are needed then they must be fitted
with a 3 degree fall back to the boiler and have a bracket fitted ever meter to support
the flue. Best recommended position of the bracket is just before the joint.
7.6.6 Vertical flue system
The 60/100 mm vertical flue system may be extended up to a maximum length as
mentioned in the table above. The vertical flue system contains a flue adapter
concentric 60/100 to replace the standard adapter on the boiler.
Please note that the terminal is suitable for a flat or pitched roof and only approved
Intergas flue products can be used with this boiler.
Bekijk gratis de handleiding van Intergas Rapid 25 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intergas |
| Model | Rapid 25 Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10092 MB |
