Intergas Rapid 25 Plus handleiding
Handleiding
Je bekijkt pagina 16 van 68
Intergas Heating Ltd 16
7 Pre heating exchanger
To enable fast delivery of domestic hot water the burner manager is
equipped with the DHW comfort function. This function maintains the
temperature of the heat exchanger to an adjustable temperature (See
section 9.1.). The DHW comfort function has the following settings:
• On: ( LED on) The appliance’s DHW comfort function is switched
on continuously. The appliance always delivers hot water
immediately.
• Eco: ( LED on) The appliance’s DHW comfort function is self
learning. The appliance will adapt to the pattern of use of the hot
water tap. As a result, the temperature of the heat exchanger will not
be maintained during the night or in the case of longer period of
absence.
It is possible to control the comfort mode by means of an Open Therm
room thermostat.
• Off: (Both LEDs off) The temperature of the heat exchanger is not
maintained, as a result of which the delivery of domestic hot water takes a
little time. If there is no need for fast delivery of hot water, the DHW comfort
function can be switched off.
4.10 Clock function
The boiler is equipped with a digital clock and offers the possibility to program 4
points in time to switch from CH off or CH on.
During the “clock active” periods the boiler will respond on CH demands from the
room thermostat. During the “clock inactive” periods the boiler will not respond on
CH demands.
Additionally the following special modes can be chosen:
• t-on (temporary on).
The boiler will respond to every CH demand from the room thermostat or
external controls until the next switch moment.
• c-on (continuous on).
The boiler will respond to every CH demand from the room thermostat or
external controls without any time limit.
• OFF.
The boiler will not respond to any CH demand from the room thermostat or
external controls.
Note
For setting and adjusting the clock see § 9.3 Setting and adjusting the clock
functions
4.11 PC Interface
The burner manager is equipped with an interface for a PC, which can be
connected by means of a special cable and associated software. This facility allows
the behaviour of the burner manager , the appliance and the heating installation to
be monitored over a longer period.
Bekijk gratis de handleiding van Intergas Rapid 25 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intergas |
| Model | Rapid 25 Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10092 MB |
