Intenso W30C² GaN handleiding
Handleiding
Je bekijkt pagina 11 van 64
USER GUIDELINES
Product overview
1 - USB-C output
2 - EU connector
Operaon
Before use:
Before connecng, check whether the connected device is suitable for this power adapter. Pay par-
cular aenon to the required power in the operang manual of the device to be connected and
also observe the instrucons given there before using this power adapter. Please note that a country-
specic adapter may be necessary.
Informaon about the power limits of this product can be found in the technical data of this ope-
rang manual.
Make sure that you have followed all the instrucons in this manual.
Connecng the device:
Plug a suitable USB cable rst into the device to be connected and then into the USB port of this
device. Then plug the power adapter into the mains socket.
The connected device should now be properly powered.
If you are charging a device with a rechargeable baery, disconnect the device from the power supply
again when it is fully charged.
If you are using a product without a baery, disconnect the device from the power supply when it will
not be used for a long period of me.
Aenon:
This device supports Power Delivery (PD), PPS and QC for fast charging. No manual sengs are
required; the standards automacally negoate the voltage and power between the devices if the
connected device also supports one of the standards. Due to the large number of dierent end de-
vices that support these standards, there may be restricons in the funcon, especially if the devices
are already older and no longer have the latest soware, and the connected device may only be
charged normally.
Please also note that the cable you use must also support the desired fast charging standard and the
higher power output. A 20 V / 3 A cable is required for power outputs up to 60 was and a 20 V / 5 A
cable for higher power outputs up to 100 was.
1
2
EN - Page 3 of 5 EN - Page 4 of 5
SERVICE/DISTRIBUTOR
INTENSO INTERNATIONAL GMBH I Kopernikusstraße 12-14 I D-49377 Vechta
Email (technical support): support@intenso.de
Email (RMA number): rma@intenso.de
Internet: www.intenso.eu
Telephone (technical support): +49 (0) 4441 – 999 111 (Mon.- Thurs. 09:00 a.m. - 4:30 p.m.;
Fri. 09:00 a.m.- 2:00 p.m.)
Bekijk gratis de handleiding van Intenso W30C² GaN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intenso |
| Model | W30C² GaN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7599 MB |
