Intellinet 508940 handleiding
Handleiding
Je bekijkt pagina 2 van 16
2
This guide presents the basic steps to set up and operate this device.
For specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/508940 or scan the QR code on the cover.
Connections
1 Wire the grounding terminal to an earth grounding object
to protect equipment from external electrical surges.
2 Connect Ethernet cable (min. Cat5e) from a PSE port on a PoE source (up
to 60 W input; IEEE 802.3bt/at/af-compliant) to the PoE IN port on the
splitter. The PWR LED lights to indicate a powered connection to PSE.
3 Connect Ethernet cable (min. Cat5e) from the DATA port
on the splitter to an RJ45 port on a network device.
4 Connect an appropriate cable from one of the DC OUT ports (either the
terminal block or the power jack; output up to 12 V / 4.25 A / 51 W) on
the splitter to the network device or other device you wish to power.
Terminal Block Installation
Note: Ensure all power is off/disconnected before beginning! The wire
gauge for the terminal block should be in the range between 12 – 24 AWG.
4-1 Loosen appropriate screws. Insert bare power-supply
wires into appropriate terminal slots (positive wire into
positive slot; negative wire into negative slot, etc.).
4-2 Tighten appropriate screws to secure wires.
4-3 Install block into the device.
1 2 3 4
English
Instructions
Bekijk gratis de handleiding van Intellinet 508940, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intellinet |
| Model | 508940 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1543 MB |
