INSTAR IN-9808 4K handleiding
Handleiding
Je bekijkt pagina 33 van 40
Go to https://install.instar.com
12-EN
8. Camera Reset
In order to reset your camera, please follow the instructions below:
1. Loosen the four screws on the backplate of your camera and put it aside.
(See. Fig.1)
2. You will nd a small black reset button next to the MicroSD slot inside the
camera. Keep pressing this reset button for 20 seconds. Once you release the
button, the camera will start the reset process. (See Fig. 2)
3. After the reset, the camera will restart, which can take up to 60 seconds.
All data in the camera will be reset to factory defaults. Therefore, please use a
network cable or WPS to reconnect the camera to your network. For more infor-
mation on how to install your camera again, please visit: https://install.instar.
com. Once you connect the camera to the network, use the INSTAR Camera
Tool to nd out the camera’s IP address and open the camera’s WebUI to start
congurating your camera again.
Fig. 1
Keep pressing for
20 seconds
Fig. 2
Bekijk gratis de handleiding van INSTAR IN-9808 4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | INSTAR |
| Model | IN-9808 4K |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 4514 MB |
