INSTAR IN-8815 4K handleiding
Handleiding
Je bekijkt pagina 23 van 32
Go to https://install.instar.com
6-EN
4.3. Status LEDs
01 - Photosensor Twilight switch for IR LEDs
02 - Lens Wide-angle (focal length: 4.3mm / eld of view: ~ 100º dia.)
03 - Infrared LEDs 10 IR LEDs (nightvision @ 850nm)
04 - Status LEDs Red: power; blue: network status (Please refer to Section 4.3)
05 - PIR Detector Integrated passive infrared motion detector
06 - Loudspeaker Integrated loudspeaker
07 - MicroSD Card Slot Slot for MicroSD/SDXC cards (max. 1024GB / 1TB)
- 32GB included inside the camera -
08 - Microphone For noise detection / audio rec. / two-way audio intercom
09 - Antenna Connector RP-SMA WiFi antenna connector
10 - Network Port RJ45 LAN port for Cat5e LAN cable or higher, for connection
to a router, switch, or PoE switch
11 - Audio Output 3.5mm jack for earphone / active speaker
12 - Alarm In/Out Input for potential free external alarm sensors
Output (relay) can support max. 24V/1A
13 - WPS / Reset 3 seconds for WPS WiFi setup / 20 seconds for reset
14 - Power Connector 5V / 2A DC - Plug Ø : 1.35mm (in) / 3.5mm (out)
15 - Mount Standard camera thread for included stand (1/4”-20 UNC)
16 - Camera Label P2P ID, LAN MAC address and serial number
Status LED Blue LED Red LED
Constant on
Connected to WiFi N/A
Slow Flashing
Connecting via WPS Camera at work
Fast Flashing
No connection to WiFi Upgrading rmware
O
LED is turned o, or camera
is not plugged into power
LED is turned o, or camera
is not plugged into power
Bekijk gratis de handleiding van INSTAR IN-8815 4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | INSTAR |
| Model | IN-8815 4K |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 3663 MB |
