Inkbird TC816 handleiding
Handleiding
Je bekijkt pagina 4 van 5
4
/
5
3) Under the running state, temperature and time can be adjusted through the SET button.
UP/DOWN Button
1) When the numeric value is flashing, press the UP or DOWN button to adjust the value.
2) Press the UP or DOWN button to add or subtract one value. Long pressing will automatically
add and subtract values.
3) Under the non-running state, press and hold the UP and DOWN buttons simultaneously for
3 seconds to restore the factory settings.
4. Temperature Calibration Function
1) After power on, press and hold the MODE button for 2 seconds to calibrate the real-time
temperature. The first line of the screen will display "CALIBRATION" and the real-time
temperature, and the calibration value on the second line will flash. Press the UP or DOWN
button to adjust the calibration value. (After adjusting the calibration value, the real-time
temperature will change accordingly.)
2) Real-Time Temperature Calibration Range: -9.9℃~9.9℃.
3) Long pressing the SET button to exit (or automatically exiting after 5 seconds of no
operation) will not save the modification. Long press the MODE button to exit and save the
modification.
5. ℃ or ℉ Selection
Press and hold the SET button for more than 5 seconds to switch between ℃ or ℉.
6. Backlight Mode (This feature is limited to the backlit version)
Turn on the AC power, and the backlight will turn on immediately. If no button is pressed, the
backlight will turn off after 10 minutes. Press any button to turn the backlight on again.
7. Memory Function: All current settings will be saved after power off.
Bekijk gratis de handleiding van Inkbird TC816, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Inkbird |
| Model | TC816 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 724 MB |
