Inkbird ITC-306A handleiding
Handleiding
Je bekijkt pagina 16 van 18
Issues Causes Solutions
Can not
connect
to WIFI.
1. Incorrect
phone
settings.
2. Incorrect
router
settings.
3. Incorrect
connection
mode
selection.
4. Device
malfunction.
1. In the phone settings, all permissions
for the INKBIRD app are turned on.
The Bluetooth and location functions of
the phone are turned on.
2. Please ensure that the router can
transmit 2.4GHz wifi signal alone, and
the mobile phone remains connected to
the 2.4GHz wifi that can access the
Internet. Please make sure the SSID of
the 2.4GHz wifi is not hidden. The
password is not empty.
There is no limit on the number of
connected devices to the router. If you
are not sure whether the upper limit has
been reached, please turn off 2-3 WIFI
devices.
Router settings are as follows:
·Wireless protocol: 802.11 b/g/n, but
cannot be set to 11n only;
·Security mode: WPA/WPA2
·Authentication type: AES
·Enable DHCP service
·No VPN service.
3. Select the correct WiFi mode in the
app. If there are many WiFi products
interfering nearby, please switch the
device to slow flash (AP) mode to
connect.
If it still does not work, please contact
customer service.
The
probe
reading
is
incorrect.
1.The probe
is placed in a
area with
poor
temperature
circulation.
2.The probe
is damaged.
1. Adjust the position of the probe.
2. If the probe was used in liquids, dry it
using a hairdryer and then test it at room
temperature.
3. Check if the probe is intact.
4. If the deviation is small, use the CA
(calibration) function to calibrate.
Troubleshooting Guide
11
12
Bekijk gratis de handleiding van Inkbird ITC-306A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Inkbird |
| Model | ITC-306A |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 1237 MB |