Inkbird ICC-510 handleiding
Handleiding
Je bekijkt pagina 13 van 21
09
Press or to select , which means that both
the CO2 and fan outlets are enabled, then press the button.
Press and hold the button to
enter the setting mode.
(botH)
(CF)
(1200ppm)
(Con)
Press or to adjust the CO2 start value, then press the
button.
(1600ppm)
(CoFF)
Press or to adjust the CO2 stop value, then press the
button. Please note that the CO2 stop value should be greater
than the CO2 start value. (CO2 Stop value ＞ CO2 Start value)
Press or to adjust the FAN start value, then press the
button. Please note that the FAN start value should be greater than
or equal to the CO2 stop value. (FAN Start value ≥ CO2 Stop value)
(2000ppm)
(Fon)
(0ppm)
(CAL)
CAL=calibration; Calibrate the value only if it is confirmed to
be biased. The default value is .
Press or to adjust the FAN stop value, then press the
button. Please note that the FAN stop value should be smaller
than the FAN start value. (FAN Stop value ＜ FAN Start value)
(1600ppm)
(FoFF)
Bekijk gratis de handleiding van Inkbird ICC-510, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Inkbird |
| Model | ICC-510 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1438 MB |
