Ingenico Move/5000 handleiding
Handleiding
Je bekijkt pagina 18 van 36
Move/5000
900017771 R11 000 15/0524
Copyright© 2024 Ingenico
All rights reserved
18
4.5 Battery
4.5.1 Main characteristics
* The battery capacity depends on the model of terminal and its use
4.5.2 Installing the battery
Turn your terminal and unclip the battery trapdoor by
pushing on the button as shown on the picture
Disengage the trapdoor
Take the battery pack included in the box
Locate the battery pack connector beside the battery
compartment
Plug the battery pack connector according to the
connector locating system and (as shown on picture).
Verify that it locks.
Place the battery pack in its compartment.
Close the battery compartment trapdoor.
Check that the terminal is not connected to the main
electric network.
WARNING
Characteristics
Li-ion 3100 mAh
Charge
(power supply-1.5A)
50% capacity in 1,5 h; full capacity
in 4 hours
Battery life
450 transactions in GPRS with fully
charged battery, printing and backlit
activated
Can remain powered ON up to 150
hours with connected GPRS link and
terminal in sleeping state starting
with fully charged battery and
without energy consumption related
to backlit or radio link
Bekijk gratis de handleiding van Ingenico Move/5000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ingenico |
| Model | Move/5000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4300 MB |
