Ingenico Move 3500 handleiding
Handleiding
Je bekijkt pagina 18 van 32
Move 3500
900019007 R11 000 12/0922
Copyright© 2022 Ingenico
All rights reserved
18
4.5.3 Charging the battery
On initial start up, charge the battery under the environmental
conditions stated above
When used daily, the terminal recharges its batteries each time it
is placed on its base . Charging is automatic
When used with a terminal power supply: connect the power
supply to Move/3500 power connector.
The environment in which the charge takes place influences
battery lifetime and autonomy (number of transactions)
The optimal conditions are as follows:
/ Charging away from any external heat source (radiator, sun,
enclosed area…)
/ The optimal temperature is between +15°C and +25°C
Using the base
Place the terminal on its base
Check if the battery symbol is flashing or moving (=battery
charging).
Using the terminal power supply (the terminal is out of its base)
Connect the terminal power supply unit to use the jack connector
located on the left side of the terminal.
Connect the power supply unit to the power supply mains network
Check to see if the battery symbol is flashing or moving(=battery
charging)
When does the battery need to be charged?
How does the battery need to be charged?
How can the battery be charged?
Bekijk gratis de handleiding van Ingenico Move 3500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ingenico |
| Model | Move 3500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4003 MB |
