Ingenico Lane/7000 handleiding
Handleiding
Je bekijkt pagina 24 van 30
Copyright© 2023 Ingenico -
Banks and Acquirers
International Holding SAS
All rights reserved
24
Lane/7000v2
900027893 R11 000 04 / 0423
6.3 Troubleshooting
Device is not working
Make sure that the Lane/7000 connector is fully inserted into the
back of the device.
Restart the device.
If you have another working Lane/7000 device, swap the devices
to determine if the problem is with the device, cable, POS, or
power supply.
If the Lane/7000 device is directly connected to a host, reset the
host by turning it off and back on again.
Magnetic Card Reader Does Not Work Properly
When sliding the card through the reader, make sure that the
magnetic stripe on the card is facing the Lane/7000 display
screen (see Swiping a Magnetic Stripe Card).
Swipe the card at a faster or middle steady speed.
Inspect the magnetic stripe on the card to make sure it is not
scratched or badly worn.
Security tag deactivation system could disturb the magnetic card
reader
6.2 Transport and storage
Disconnect all cables from the terminal during the
transport.
Use the original packaging for storage or returning the unit.
CAUTION
Before making any operations of maintenance in the
ter mi na l , make su re tha t t h e powe r sup pl y i s d i sc on ne cte d .
1) Please note: While cleaning as per the instructions above has no
impact on the performances or functions of our terminal, a very frequent
cleaning may modify the cosmetic aspect of some plastic parts used
into our devices; such cosmetic wear is not covered by the standard
INGENICO warranty conditions.
Bekijk gratis de handleiding van Ingenico Lane/7000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ingenico |
| Model | Lane/7000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4980 MB |
