Ingenico Lane/7000 handleiding
Handleiding
Je bekijkt pagina 20 van 30
Copyright© 2023 Ingenico -
Banks and Acquirers
International Holding SAS
All rights reserved
20
Lane/7000v2
900027893 R11 000 04 / 0423
5.Daily use
5.1 Card reading
5.1.1 Swiping a card
Insert the card manually in the reader, magnetic
stripe facing the main body of the terminal,
and slide the card from the rear to the front in a
continuous motion for best results.
5.1.2 Inserting a smart card
Chip cards should be inserted into your
terminal as illustrated with the chip facing up
and into the card reader.
5.1.3 Reading a contactless card
Bring the card to the active zone above the
contactless logo (at about 1cm).
Keep the card close to the contactless logo
during the transaction.
Your contactless terminal provides four contactless status lights located
above the contactless logo.
When a contactless transaction is started the first (left hand) status
light will be lit steadily; this indicates that the contactless is in use but
a card is not being read.
When a contactless card is presented to the contactless active zone
during a transaction the second, third and fourth status lights will be
lit in turn. The card read is successful when all four status lights are lit
and a confirmation tone can be heard.
Swipe the card with constant speed, neither too slowly
nor too fast, to maximize the reading efficiency and avoid
annoying repetitions.
Bekijk gratis de handleiding van Ingenico Lane/7000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ingenico |
| Model | Lane/7000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4980 MB |
