Ingenico AXIUM EX8000 handleiding
Handleiding
Je bekijkt pagina 14 van 28
Turn the terminal and remove the battery door.
MicroSD are identified by the engraved marks on
the lower housing.
Insert MicroSD card and push it to the end.
Close the battery door.
NOTE: The terminal supports SDHC MicroSD cards
up to 32GB.
4.4 Battery
4.4.1 Charging the battery
For safety reasons, the battery included with the terminal is not fully
charged. Please charge the battery before use.
When used daily, the terminal charges its battery each time the power
adapter is connected. Charging starts automatically.
4.4.2 Installing the battery
WARNING
Check that the terminal is not connected to the main electric
network.
Connect the power adapter to the terminal USB type-C
connector located on the left side of the terminal.
Connect the power adapter to the power supply mains
network.
When charging, a red charge light at the top of the screen will
display. This light will turn green when the terminal is fully
charged" (check that behavior!).
In order to charge the battery:
Using the power adapter
14
AXIUM EX8000
07/11
Copyright© 2023 Ingenico –
Banks and Acquirers International Holding SAS
All rights reserved
Bekijk gratis de handleiding van Ingenico AXIUM EX8000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ingenico |
| Model | AXIUM EX8000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2052 MB |
