Ingenico AXIUM DX4000 Hybrid handleiding

34 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 19 van 34
AXIUM DX4000 Hybrid 19 Copyright©2024 Ingenico–
04/10 Banks and Acquirers International Holding SAS
All rights reserved
4.2.2 MicroSD Memory Card
MicroSD connector is located inside the terminal, in a closed
compartment.
Turn the terminal and remove the battery door.
MicroSD are identified by the engraved marks on the lower
housing.
Slide the cover to the end and pull to open it. Insert MicroSD card,
push the cover to close and slide it to the top to lock it. Be sure
to put the MicroSD card contacts downside and the cut corner as
indicated on the figure.
Close the battery door.
NOTE: The terminal supports MicroSD up to 32GB.
ADVICE
AXIUM DX4000 Hybrid is equipped with a dual SIM slot.
When using two SIM cards, it is recommended to insert the bottom one first,
then the top one.
When using only one SIM card, it is recommended to insert SIM1 slot (bottom).
WARNING
Switch off the terminal before opening the battery door.
ADVICE
SIM and SAM cards share the same form factor, please do be careful to the
SIM card socket position.

Bekijk gratis de handleiding van Ingenico AXIUM DX4000 Hybrid, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkIngenico
ModelAXIUM DX4000 Hybrid
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5906 MB