Handleiding
Je bekijkt pagina 24 van 30
Page 22
TROUBLESHOOTING
SYMPTOM POSSIBLE SOLUTIONS
No power • Verify the power cord is properly connected to the power outlet and to
the display.
• Verify the power switch is ON and that the Power button on the remote or keypad has
been turned on (the front LED should be green).
• Plug another electrical device to the power outlet to verify that the outlet is supplying
the proper voltage.
The display shuts down suddenly • Verify that a source is active.
• The display may have overheated. Remove any objects blocking the vents.
No image • If attempting to display an external source, see “No image from external source” below.
• Verify that the display is turned on (the front LED should be green).
No image from external source • Verify that connections between the source and the display have been
made correctly.
• Verify that the cables are in good condition.
• Verify the correct input source is selected and that the input signal is compatible with
the display.
The colors on the display do not look
right
• Adjust the color settings in the Picture menu.
• Reset the picture settings.
• Verify that connections between the source and the display have been made correctly.
• Verify that the cables are in good condition.
INF6505: No touchpad activity with
external computer
• Verify that the USB B to USB type A cable is plugged from the laptop into the display
correctly.
• Verify that the laptop’s operating system is Windows® 7 or later. (The display touchpad
does not support any other operating systems.)
INF6505: Touchpad functions are not
functioning consistently
• Remove all objects placed on the lip of the display and/or within 2” of the touchpad
screen.
• Disable the PiP feature.
• Power the display o and back on after a few seconds. Re-booting the display helps the
touchpad to re-synchronize.
Remote is not working • Make sure the batteries are installed in the proper orientation and are not dead.
• Verify the remote is turned on (the button is on the bottom of the remote).
• Verify you are pointing the remote at the table and are within 26’ (8m) and 30 degrees
(horz/vert) of the sensor.
• Verify that the IR Control setting in the Advanced Option OSD menu is set
to Normal.
Audio noise • Noise can occur when infrared communication equipment (for example, infrared cordless
headphones) is used near the display. Move the infrared communication equipment away
from the display to eliminate the noise.
Bekijk gratis de handleiding van InFocus JTouch INF6505, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InFocus |
| Model | JTouch INF6505 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3428 MB |
