InFocus INF6510 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253/ 53

Afdrukken

Je bekijkt pagina 25 van 53

Basic settings

PC Module On/Off

If the product is installed with the optional PC module and it is in the “PC” signal source, the PC module will

start automatically. If not, start it manually by pressing the power button on the PC Module.

The power key on the panel or remote control can be used to turn off the display, the display will request

confirmation to proceed.

Do not directly disconnect the power supply from the display without turning off the PC module as it can

damage the PC module.

Signal Source Switching

You can use the remote control or touch function to switch the source by the following methods:

Method one:

•

Press the icon in the upper right side of the screen that looks like a laptop screen with arrows (fig.1)

•

Select the signal source and then the product will switch to the input signal source you selected.

Method two:

•

Press the "Input" key on the remote controller to open the “Input mode menu”

•

Press the cursor keys on the remote control to select a signal source

•

Press the"OK" key, and then the product will switch to the input signal source that you selected.

Method three:

•

Swipe up from the bottom of the screen to open the “input” menu. (fig.2)

•

Select the signal source and then the product will switch to the input signal source you selected.

InFocus - JTouch 10 Hardware Guide25

infocus.com | Always InFocus .

Note

The PC Module is an optional purchase

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253/ 53

Bekijk gratis de handleiding van InFocus INF6510, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd