InfiRay Rico Hybrid HYH75W handleiding
Handleiding
Je bekijkt pagina 6 van 31
8 9
7. QUICK START GUIDE
Step 1: Prepare to Use the RICOHYBRID
1. Compare the box contents to the accessories list and examine
each for any shipping damage. See Accessories on page4.
2. Check the lens to ensure there are no smudges or dirt present.
Clean with the included lens cloth, if necessary.
3. Charge the battery (15). See Charging the Battery Pack on
page10.
4. Install the eyeguard (9).
5. Mount the RICOHYBRID to the weapon. See Mounting the
RICOHYBRID on page14.
Step 2: Turn On the RICOHYBRID
1. Open the objective lens cap (1).
2. Long press the Power Button for 3 seconds to power on the
RICOHYBRID. The InfiRay Outdoor logo will appear.
3. Rotate the diopter adjustment ring (8) of the eyepiece until the
interface icons are clear.
WARNING: Do not point the objective lens toward intense
energy sources, such as the sun. This may render the electronic
components inoperative. The warranty does not cover damage
caused by improper operation.
Step 3: Adjust Settings in the Quick Menu
Short press the Rotary Encoder to enter the quick menu to adjust the
following settings (see Using the Quick Menu on page19):
1. Set the image brightness level, from 0–9.
2. Set the image contrast level, from 0–9.
3. Set image sharpness level, from 0–9.
4. Set the non-uniformity correction (NUC) mode to automatic (A),
manual (M), or background (B).
5. Select the reticle type, 1–7, or the DIY reticle.
6. Set the reticle color to white, black, red, green, or blue.
7. Select a zero distance from the three preset options.
Step 4: Adjust Device Settings in the Main Menu
1. Long press the Rotary Encoder to enter the main menu (see
Main Menu Options and Descriptions on page34 for detailed
instructions) to:
a. Turn on the compass.
b. Set the photo settings to single shot, burst, or self-timer.
c. Set the image hue to cool or warm.
d. Calibrate the compass.
e. Turn on the microphone.
f. Turn on recoil activated video.
g. Set the date and time.
h. Set the unit of measure to meters or yards.
2. From the home screen:
a. Rotate the Rotary Encoder to zoom in and out on the
observed object.
b. Long press the Palette Button to set the color palette to
white hot, black hot, red hot, iron red, rainbow, or outline.
c. Short press the Palette Button to set the imaging mode to
clear, highlight, or fog.
d. Short press the Brightness Button to set the display
brightness level, from 0–10. A brightness
icon and
indicator bar will appear in the lower-left corner of the
screen.
e. Long press the Brightness Button to turn on the PIP
window. See Picture in Picture (PIP) on page29.
Step 5: Activate the Reticle
The reticle may be inactive when the RICOHYBRID is powered on for
the first time. To activate the reticle, or to deactivate it at a later time:
1. From the home screen, long press the Rotary Encoder to enter
the main menu.
2. Rotate the Rotary Encoder to move to the settings menu item.
3. Short press the Rotary Encoder to enter the settings submenu.
4. Long press the Rotary Encoder and the Brightness Button at
the same time for 3 seconds to activate the reticle and hidden
reticle and zeroing menu items.
Step 6: Zero the RICOHYBRID
1. Zero the rifle scope. See Zeroing the RICOHYBRID on
page22.
a. Select the gun type, A, B, or C.
b. Select the bullet type, 1, 2, or 3.
c. Select, or customize, a preset zero distance that matches
the target distance.
d. Zero the reticle.
Bekijk gratis de handleiding van InfiRay Rico Hybrid HYH75W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | Rico Hybrid HYH75W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8175 MB |
