InfiRay BOLT TL35 V2 handleiding
Handleiding
Je bekijkt pagina 25 van 26
46 47
ISSUE POSSIBLE CAUSES TROUBLESHOOTING STEPS
The aiming reticle shifts after
firing rounds.
The TL35V2 is not mounted securely
or the mount is not secured on the
TL35.
• Check that the TL35V2 has been securely mounted.
• Make sure you are using the same brand, type, and weight of the bullets as
when the TL35V2 and weapon were initially zeroed.
• If the TL35V2 was zeroed in dierent environmental conditions, a slight shift
of the zero is possible.
The image of the object being
observed is missing.
Looking through glass. Remove any glass windows from the field of view.
The TL35V2 will not focus.
Image settings are not optimal for the
current environmental conditions or
the object being observed.
• Check the outer surfaces of the objective lenses and eyepiece and, where
necessary, wipe away any dust, condensation, frost, etc.
• In cold weather, you can use special anti-fogging coatings, such as those
made as for corrective glasses.
• Adjust the focus on the target by rotating the Objective Focus Ring (14).
• Adjust the image sharpness in the quick menu. See Using the Quick Menu
on page19.
• Adjust the image and device settings. See Quick Start Guide on page8.
• Turn on Ultra-Clear mode. See Main Menu > Ultra-Clear on page29.
Image quality is too low or the
detection range is reduced.
These issues may occur due to the
weather conditions, such as snow,
rain, humidity, and fog.
Turn on Ultra-Clear mode. See Main Menu > Ultra-Clear on page29.
When the TL35V2 is used in low
temperature conditions, the image
quality of the surroundings is
worse than in warm temperature
conditions.
Environmental conditions.
In warm temperature conditions, objects being observed (surroundings and
background) heat up dierently because of thermal conductivity, thereby
generating a high temperature contrast. Accordingly, image quality produced by
the rifle scope will be higher. In low temperature conditions, the background will
cool down to roughly the same temperature, and thus the temperature contrast
is substantially reduced and image detail can go down as there is less contrast
in the scene. This is a normal function of a thermal imager and is no indicator of
actual detector performance.
32. NOTES
Bekijk gratis de handleiding van InfiRay BOLT TL35 V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TL35 V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6057 MB |
