InfiRay BOLT TH50C V2 handleiding
Handleiding
Je bekijkt pagina 14 van 28
24 25
Manual Mode
In manual mode (M), the user independently determines the need to
perform a NUC based on the quality of the observed image. It is not
necessary to close the objective lens cap(15) during a manual NUC,
as the internal shutter covers the sensor.
To perform a manual NUC while in manual mode (or automatic mode):
1. From the home screen, short press the Power
Button.
2. A manual NUC is performed instantly.
Background Mode
In background mode (B), the user independently determines the
need to perform a background NUC based on the quality of the
observed image. A background NUC uses less power than an
automatic or manual NUC because it does not use the imager shutter
to cover the sensor; instead, the user must close the lens cap(15).
To perform a background NUC while in background mode:
1. Close the objective lens cap(15).
2. From the home screen, short press the Power
Button.
3. A prompt to close the lens cap appears onscreen. The
background NUC starts after about 4seconds.
NOTE: If the lens is not properly covered, a temporary “image
burn” will remain in the image until the next non-uniformity
correction. This “image burn” is temporary and is not a defect or
sign of permanent damage.
18. PHOTOGRAPHY AND VIDEO
RECORDING
The TH50CV2 is equipped with video recording and image capture.
All videos and photos are automatically saved on the internal 32GB
memory storage.
NOTE: Photo and video files are named with the time and date;
therefore, it is recommended to set the date and time before using
the photo and video functions. See Settings Menu > Date and
Settings Menu > Time on page42. Alternatively, the date and
time may be synchronized with one button in the InfiRay Outdoor
App.
Photography
To take a photo:
1. From the home screen,
short press the Photo
Button.
2. The image will freeze
for 0.5 seconds and
the camera
icon will
appear briefly in the
upper-left corner of the
screen.
NOTE: An red warning
icon
appears next to the
camera icon in the upper-left corner of the screen when insucient
memory storage is available. Transfer video and image files to
other storage media to free up space on the memory card.
Video Recording
To record video:
1. From the home screen,
long press the Photo
Button to start a video
recording.
2. When the video
recording starts, the
video recording timer, in
HH:MM:SS (hour: minute:
second) format, appears
in the upper-right corner
of the screen.
3. When recording, short press the Photo
Button to take a
photo.
4. Long press the Photo
Button to stop and save the video
recording.
Video and Photography Tips
• You may enter and navigate the menu as normal during video
recording. Only the reticle appears in recorded photos and
video; the user interface (status bar and menu) is not captured.
• Recorded photos are saved to the internal memory card in .jpg
format, videos are saved in .mp4 format.
• Photos are saved in IMG_HHMMSS_XXX.jpg format.
• Videos are saved in VID_HHMMSS_XXX.mp4 format.
• HHMMSS is hour/minute/second.
• XXX is a 3-digit counter number.
Bekijk gratis de handleiding van InfiRay BOLT TH50C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TH50C V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7222 MB |
