Handleiding
Je bekijkt pagina 6 van 44
HARMAN International Industries,
Incorporated 8500 Balboa Boulevard,
Northridge, CA 91329 USA
www.infinityspeakers.com
© 2018 HARMAN International Industries, Incorporated. All rights reserved.
Infinity is a trademark of HARMAN International Industries, Incorporated,
registered in the United States and/or other countries. Features, specifications
and appearance are subject to change without notice.
Place the tweeter in the mounting location, then turn each setscrew clockwise to tighten mounting brackets. Use caution so
as not to overtighten. Snap the included outer ring over the mounting bracket to hide the setscrews.
Specications
Kappa 6 Kappa 8 Kappa 10
Continuous power
handling
100W 200W 300W
Peak power handling 300W 500W 900W
Frequency response 40Hz – 25kHz 30Hz – 22kHz 20Hz – 2kHz
Nominal impedance 3 Ohms* 3 Ohms* 2 or 4 Ohms (use
switch to select)
Sensitivity 92dB 92dB 89dB
External diameter 7-15/32” (189.4mm) 9-1/2” (241mm) 11-5/8” (295mm)
Mounting cutout diameter 5-23/32” (144.8mm) Woofer: 7” (177.4mm)
Tweeter bracket: 4-9/16”
(115.9mm)
9-9/16” (235.6mm)
Total depth 3-21/32” (92.5mm) 4-9/32” (108.1mm) 6-13/32”
(162.4mm)
Mounting depth 2-9/16” (65mm) 3-3/16” (80.5mm) 4-7/8” (123mm)
*NOTE: Because of the woofer’s low impedance, do not wire two or more in parallel to an amplifier; doing so can result in
overheating and damage to the amplifier.
EN
Bekijk gratis de handleiding van Infinity Kappa 6120M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Infinity |
| Model | Kappa 6120M |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 7565 MB |
