Infinity Furion W402 WashBeam handleiding

Verlichting

Infinity

56 pagina's

PDF beschikbaar

Handleiding

4.6. Connecting to Power Supply

DANGER

Electric shock caused by short-circuit

The device accepts AC mains power at 100–240 V and 50/60 Hz. Do not supply power at any other voltage or

frequency to the device.

This device falls under IEC protection class I. Make sure that the device is always electrically connected to the

ground (earth).

Before connecting the device to the socket-outlet:

•

Make sure that the power supply matches the input voltage specified on the information label on the

•

device.

•

Make sure that the socket-outlet has ground (earth) connection.

•

Connect the device to the socket-outlet with the power plug. Do not connect the device to a dimmer circuit,

as this may damage the device.

This device is IP65 rated.

• Do not expose the device to conditions that exceed the rated IP class conditions.•

• Keep the connectors sealed with the rubber caps when the connectors are not in use.•

• Do not connect the cables from above the connectors, if the device is installed outdoors. Make a ‘drip•

loop’ in the cable so that rain water cannot enter the device.

• Make sure that the cable run is not too heavy. A heavy cable run can cause damage to the connectors. If•

the connectors are damaged, their ingress protection (IP) can deteriorate.

4.7.

Power Linking of Multiple Devices

This device supports power linking. Power can be relayed to another device via the power OUT connector.

Note that the input and the output connectors have different designs: one type cannot be connected to the

other.

Power linking of multiple devices must be carried out only by instructed or skilled persons.

WARNING

Incorrect power linking may lead to overload of the electrical circuit and result in serious

injuries and damage of property.

To prevent overload of the electrical circuit, when power linking multiple devices:

• Use cables with sufficient current-carrying capacity. The power cable supplied with the device is not•

suitable for power linking of multiple devices.

• Make sure that the total current draw of the device and all connected devices does not exceed the rated•

capacity of the power cables and the circuit breaker.

• Do not link more devices on one power link than the maximum recommended number.•

Maximum recommended number of devices:

• at 100–120 V: 4 devices Furion W402 WashBeam•

• at 200–240 V: 8 devices Furion W402 WashBeam•

Product code: 41440

Furion W402 WashBeam

Bekijk gratis de handleiding van Infinity Furion W402 WashBeam, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.