Infinity Furion S402 Spot handleiding
Handleiding
Je bekijkt pagina 38 van 64
• Wireless Unlink: Terminate the connection between the device and the transmitter (NO/YES)•
• DMX Fail: Set the behavior of the device in case of a DMX failure. There are 2 options: OFF•
(the device will black out the light output) and HOLD (the device will use the last
properly received DMX signal which ensures undisrupted performance)
• Fans (see 6.7.2.3. Fans)•
• Network Setup (see 6.7.2.4. Network Setup)•
• Lock Code (see 6.7.2.5. Lock Code)•
• BL.O. P/T Move: The device will black out the light output when Pan/Tilt are active (NO/YES)•
• BL.O. Color Move: The device will black out the light output during the color wheel movement (NO/•
YES)
• BL.O. Gobo Move: The device will black out the light output during the gobo wheel movement (NO/•
YES)
• Service Menu (see 6.7.2.6. Service Menu)•
• Reset User Hours: Reset the total operation time counter (NO/YES)•
• Reset Function (see 6.7.2.7. Reset Function)•
• Factory Settings: Restore the factory default settings (NO/YES)•
02) Press the ENTER button to confirm the selection.02)
6.7.2.1. Dimmer Curve
In this submenu you can select the dimming curve.
01)
Press the UP/DOWN buttons to select one of the 4 options:
01)
•
Linear
•
•
Square
•
•
Inverse Square
•
•
S-Curve
•
02) Press the ENTER button to confirm.02)
6.7.2.2.
PWM Option
In this submenu you can adjust the PWM (pulse-width modulation) frequency of the LEDs.
01) Press the UP/DOWN buttons to select one of the 6 options:01)
• 600 Hz•
• 1200 Hz•
• 2000 Hz•
• 4000 Hz•
• 6000 Hz•
• 15000 Hz•
37
c
Product code: 41450
Furion S402 Spot
Bekijk gratis de handleiding van Infinity Furion S402 Spot, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Infinity |
| Model | Furion S402 Spot |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 8946 MB |
