Infiniton GG-43BK handleiding
Handleiding
Je bekijkt pagina 29 van 64
Installation
Before installing the hob, make sure that:
•
The work surface is square and level, and no structural furniture interferes with space requirements.
The work surface is made of a heat-resistant and insulating material.
If the hob is installed above an oven, the oven has a built-in fan.
The installation shall comply with all clearance requirements and current standards and regulations.
A suitable disconnection switch is incorporated in the fixed wiring system to allow for complete
disconnection of the mains supply. The isolating switch shall be mounted and positioned in
accordance with local electrical installation rules and regulations.
The isolating switch must be approved and must provide 3 mm contact separation on all poles (or
on all active [phase] conductors if local wiring regulations allow this variation of requirements).
The isolating switch must be accessible to the customer after the hob has been installed.
Consult local building authorities and ordinances if in doubt about installation.
Use heat-resistant, easy-to-clean finishes (such as ceramic tile) for wall surfaces surrounding the
cooktop.
•
•
•
•
•
•
•
•
After installing the hob, make sure that:
• The power cord is not accessible through cabinet doors or drawers.
There is an adequate flow of fresh air from the outside of the cabinet to the base of the hob.
If the hob is installed on top of a drawer or cabinet, a thermal protection barrier must be installed
under the base of the hob.
The isolation switch is accessible to the customer.
•
•
•
English
31
Bekijk gratis de handleiding van Infiniton GG-43BK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Infiniton |
| Model | GG-43BK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5863 MB |
