Infiniton CSTCH24A2 handleiding
Handleiding
Je bekijkt pagina 138 van 216
inniton.es138
English
Troubleshooting
ERROR
CODE
DESCRIP-
TION
POSSIBLE CAUSE
POSIBLE CAUSA
E0
Blink 11 times, stop 2
seconds
Refrigerant leakage • Internal compressor protection
• System less refrigerant
• Reverse failure of the 4-way valve
E1
Blink 1 time, stop 2
seconds
TA (indoor unit temperature
sensor) is abnormal
• Sensor damage
• Bad sensor contact
E2
Blink 2 times, stop 2
seconds
TWD (defrosting sensor sensor)
is abnormal
• Sensor damage
• Bad sensor contact
E3
Blink 3 times, stop 2
seconds
TE(indoor unit coil sensor) is
abnormal
• Sensor damage
• Bad sensor contact
E4
Blink 4 times, stop 2
seconds
Drainage system failure • Water pump failure
• Deterioration of differential switch
• Float switch blocked
E5
Blink 5 times, stop 2
seconds
Communication failure • Communication line sequential error
• Bad contact of the communication line
E6
Blink 6 times, stop 2
seconds
Outdoor protection (phase
sequence)
• Power line is out of phase
• Power line phase sequence error
E7
Blink 7 times, stop 2
seconds
TL(outdoor condensing tempe-
rature sensor) is abnormal
• Sensor damage
• Bad sensor contact
E8
Blink 8 times, stop 2
seconds
TP(Discharge temperature sen-
sor) is abnormal
• Sensor damage
• Bad sensor contact
E9
Blink 9 times, stop 2
seconds
Low pressure protection. • System with less refrigerant
EA
Blink 10 times, stop
2 seconds
Outdoor protection (Discharge
temperature is too high.)
• Action of the external protective device
F1
Blink 5 times, stop 2
seconds
Communication failure between
indoor unit and outdoor unit.
• Communication line sequence error
• Communication line bad contact
F2
Blink 2 times, stop 2
seconds
Exhaust overtemperature pro-
tection.
• Switching failure of the external fan
F3
Blink 3 times, stop 2
seconds
Outdoor fan 1 # is abnormal • Bad connection of the fan connection
• Motor damage
F4
Blink 4 times, stop 2
seconds
Indoor fan is abnormal • Bad connection of the fan connection
• Motor damage
F5
Blink 5 times, stop 2
seconds
Outdoor temperature sensor • Sensor damage
• Bad sensor contact
F6
Flashing 6 times,
stop 2 seconds
Compressor over-current pro-
tection
• Compressor clogging
• Low voltage
Códigos de error en modelos de velocidad constante
Cuando el aire acondicionado falla, el receptor de temporización de la placa controladora, la luz de
avería de la placa PCB de la unidad exterior y el panel LCD del control remoto mostrarán el código de
avería correspondiente de acuerdo con las diferentes indicaciones de avería.
La respuesta especíca es la siguiente:
Bekijk gratis de handleiding van Infiniton CSTCH24A2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Infiniton |
| Model | CSTCH24A2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 32676 MB |
