Handleiding
Je bekijkt pagina 35 van 82
1. Remove all packaging material. This includes the foam base and all
adhesive tape holding the freezer accessories inside and
outside.
2. Inspect and remove any remains of packing, tape or printed
materials before powering on the freezer.
• Your freezer
is designed for freestanding installation only.
It should not be recessed or built-in.
• Place
the freezer on a floor strong enough to support it fully loaded.
• When moving
the freezer, never tilt it more than a 45-degree angle.
This could damage the compressor and the sealed system.
• If the
freezer is tilted let it stand in an upright position for at least 24
hours prior to plugging. This is to allow the refrigerant to settle.
• To assure
your freezer works at the maximum efficiency it
was designed for, you should install it in a location where there
is proper air circulation, plumbing and electrical connections.
•
The following
are recommended clearances around the freezer:
Sides……………4” (102mm)
Back..................4” (102mm)
Top....................Do not block
Unpacking Your Freezer
Adjusting Your Freezer
Proper Air Circulation
Installing Your Freezer
Bekijk gratis de handleiding van Infiniton CH-421AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Infiniton |
| Model | CH-421AC |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 9128 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Kleur van het product | Wit |
| Gewicht | 60000 g |
| Kinderslot | Nee |
| Geluidsniveau | 42 dB |
