Infiniton CAS2OV80D handleiding
Handleiding
Je bekijkt pagina 14 van 37
inniton.es14
Safety information
English
General security
The water heater is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the heater.
The wall on which the electric water heater is installed must be able to withstand the load of more than
twice the heater completely lled with water without warping or cracking. If this is not the case, other
reinforcement measures must be taken.
The socket outlet must be reliably grounded. The installation height of the socket must not be less than
1.8m. The rated current of the socket must not be less than 16A. The socket and plug must be kept dry to
avoid electrical leakage. If the power cord is damaged, the special power cord supplied by the manu-
facturer should be used and replaced by professional service personnel.
The maximum inlet water pressure is 0.5MPa; the minimum inlet water pressure is 0.1MPa, which is ne-
cessary for proper operation.
When using the heater for the rst time (or when using it for the rst time after maintenance), the heater
cannot be started until it has been completely lled with water. During water lling, at least one of the
heater’s outlet valves must be opened to evacuate air. This valve can be closed once the heater is com-
pletely lled with water.
The pressure relief valve enclosed with the heater should be installed on the cold water inlet of this hea-
ter, ensuring that it is not exposed to fogging. Water may ow out of the pressure relief valve, so the out-
let pipe should be wide open to the air. To drain the water inside the inner vessel, it can be drained from
the pressure relief valve. Loosen the threaded screw of the pressure relief valve and lift the drain lever
upwards (see Fig. 1). The drain pipe connected to the pressure relief port must be kept sloped downward
and in a frost-free environment. Water may drip from the discharge tube of the pressure relief device
and that this tube should be left open to the atmosphere.
During heating, water droplets may fall out of the pressure release orice of the pressure relief valve,
which is a normal phenomenon. The pressure release orice must not be blocked under any circum-
stances, otherwise the heater may be damaged, even causing accidents. If a major water leakage oc-
curs, contact the customer service center for repair.
The pressure relief valve should be checked and cleaned regularly, to ensure that it is not blocked.
Since the water temperature inside the heater can reach 75°C. the hot water should not be exposed to
the human body when it is used for the rst time. Adjust the water temperature to a suitable temperatu-
re to avoid scalding.
If any part or component of this electric water heater is damaged, please contact the customer service
center for repair.
Bekijk gratis de handleiding van Infiniton CAS2OV80D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Infiniton |
| Model | CAS2OV80D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3905 MB |
