Infiniton CAS2OV50D handleiding
Handleiding
Je bekijkt pagina 19 van 37
19 inniton.es
Cleaning & Maintenance
English
WARNING! Before performing any maintenance, turn off the power.
WARNING! Non-professionals are not allowed to disassemble the thermostat to reset it. Please
contact professionals to do the maintenance. Otherwise, our company will not be responsible if
any accident occurs.
• Check the plug and socket as often as possible. There must be a safe electrical contact and proper
grounding. The plug and socket must not become excessively hot.
• If the heater is not used for a long time, especially in regions with low ambient temperature (below
0°C), it is necessary to drain the water from the heater to avoid damage to the water heater due to
freezing of the water in the inner tank. (Refer to the precautions in this manual for the method of drai-
ning the water from the inner tank).
• To ensure reliable and durable operation of the water heater, it is recommended to regularly clean
the inner tank and remove deposits on the electric heating element of the water heater, as well as
check the condition (completely decomposed or not) of the magnesium anode and, if necessary,
replace it with a new one in case of complete decomposition.The frequency of cleaning the tank
depends on the hardness of water located in this territory. Cleaning should be carried out by special
maintenance services. You can ask the seller for the address of the nearest service center.
• The water heater is equipped with a thermal switch, which cuts off the power supply of the heating
element in case of overheating of the water or its absence in the water heater. If the water heater is
connected to the mains, but the water does not heat up and the indicator does not light up, then the
thermal switch was disconnected or not connected. To reset the water heater to the operating con-
dition, it is necessary:
1. Switch off the water heater, remove the side/bottom cover plate.
2. Press the button, located in the center of the thermal switch (A);
3. If the button is not pressed and no clicking sound is produced, you should wait for the thermal switch
to cool down to the initial temperature.
Bekijk gratis de handleiding van Infiniton CAS2OV50D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Infiniton |
| Model | CAS2OV50D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3905 MB |
