Handleiding
Je bekijkt pagina 7 van 13
7 / 13
Preparations for use
1. Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the refrigerator
after more than 1 hour’s standing, so as to ensure its normal operation.
2. Cleaning
Conrm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the refrigerator door, if the temperature inside the
refrigerator compartment drops obviously, it indicates the refrigeration system is working normally.
4. Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled according
to the user’s temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3 hours to be fully coo-
led. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully cooled (Try to open the refrige-
rator door as less as possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and leakage circuit breaker
are normal. If vibration noises are produced due to the refrigerator contacting the wall or if the wall gets blackened by air con-
vection around the compressor, move the refrigerator away from the wall. Setting up the refrigerator may cause jamming noise or
image chaos to the mobile phone, xed-line telephone, radio receiver, television surrounding it, so try to keep the refrigerator as
far away as possible in such case.
Functions
1. Functions
When the refrigerator system is powered on for the rst time, all icons on the display panel gets illuminated for 2s.
1.1 Temperature setting
Temperature can be adjusted by pressing the ‘SET’ key. Every time when the “SET” key is pressed, the current mode indicator
lights o while the next mode indicator lights up, with the said mode setting validated if no key operation within 5s (or else, the
mode setting will be invalid). After the setting takes eect, temperature will be immediately controlled as per the mode setting.
The temperature modes cycle as following: “5→4→3→2→1→FAST COOL→5”
COLDEST
COLD
5
When the user needs a colder temperature.
4
3 When in normal use.
2
When the user does not need a colder temperature.
1
The Freezing temperature control
Freezer temperature control
• The freezer temperatures are controlled by the knob switch (as illustrated on
the right) in the following manner:
• When the temperature mode keeps unchanged, turn the temperature control
knob switch clockwise, then the refrigerator temperature decreases while the
freezer temperature gets increased.
• When the temperature mode keeps unchanged, turn the temperature control
knob switch anticlockwise, then the refrigerator temperature increases while
the freezer temperature gets decreased.
• It is recommended to adjust the temperature control knob switch to the middle
position. When you need a lower freezer temperature, turn the temperature
control knob switch properly in the anticlockwise direction to decrease the
freezer temperature (note that the refrigerator temperature will increase con-
currently). When the temperature satises the need, be sure to turn the control
knob switch back to the middle position in a timely manner.
Bekijk gratis de handleiding van Indesit INKF 8251 S4UK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Indesit |
| Model | INKF 8251 S4UK |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 1693 MB |
