Indesit BTW S72500 EU handleiding
Handleiding
Je bekijkt pagina 4 van 72
TROUBLESHOOTING
The washing machine may sometimes not work properly for certain reasons. Before calling the After-Sales Service, it is recommended to check to see if
the problem can be easily resolved using the following list.
Anomalies: Possible causes / Solution:
The washing machine does not turn on
and/ or programme does not start
• The plug is not inserted into the electrical outlet, or not enough to make contact.
• There has been a power failure.
• Lid is not properly closed.
• The “Child lock” function has been activated (if available).
• The washing machine switched o automatically to save energy, before programme start or
after programme end. To switch on the washing machine, turn the programme selector rst to
“O/O” and then to the desired programme again.
The wash cycle does not start.
• The “Start/Pause” button has not been pressed.
• The water tap is not open.
• A “Start delay” has been set.
Appliance stops during the
programme, and the
“Start/Pause” light blinks
• Programme has been changed - reselect desired programme and press “Start/Pause” .
Appliance vibrates
• The washing machine is not level.
• The transport bracket has not been removed; before using the washing machine, the transport
bracket must be removed.
Final spin results are poor. The laundry
is still very wet. “Spin” indicator blinks,
or the spin speed on the display blinks,
or the spin speed indicator blinks after
the end of the programme - depending
on the model
• Unbalance of the laundry load during spinning prevented the spin phase to avoid damages on
the washing machine. This is why the laundry is still very wet. Reason for unbalance can be:
small laundry loads (consisting of only few quite big or absorbent items, e.g. towels), or big/
heavy laundry items.
• If possible avoid small laundry loads.
• “Spin speed” button has been set to a low spin speed.
The machine is indicating an error code
(e.g. F-02, F-..) and/or “Service”
indicator lights up
• Shut o the machine, disconnect the plug from the outlet, and wait about 1 minute before
turning it back on.
• If the problem persists, call the After-sales service.
“Clean lter” indicator lights up
• Waste water is not pumped out.
• Clean the water lter
“Water tap closed” indicator lights up
• Appliance has no or insucient water supply.
“Detergent overdosage” indicator
lights up (if available )
• The symbol will light up at the end of the programme if you used too much detergent.
• Too much foam is formed.
• The detergent is not compatible with the washing machine (it must bear the wording “for
washing machines”, “for hand washing and washing machines”, or something similar).
You can download the Safety Instructions, Product Fiche and Energy data by:
• Using the QR code in your appliance
• Visiting our website - docs.indesit.eu and parts - selfservice .europeanappliances. com
• Alternatively, contact our After-Sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please
state the codes provided on your product’s identication plate.
For User Repair & Maintenance Information visit www.indesit.com
You can nd more information about your model online at https://eprel.ec.europa.eu/ which is the ocial EU EPREL product database. After
selecting the Product Category, enter the Model Identier of the product. The Model Identier is made up of letters and numbers and can be
found on the identication plate, as Mod. (see image on the right).
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
Bekijk gratis de handleiding van Indesit BTW S72500 EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Indesit |
| Model | BTW S72500 EU |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 16622 MB |
